HOW TO SET UP A POLAR MOUNT & 36v ACTUATOR
& 36v H-H MOTORISED SATELITE SYSTEMS
Ideally, you should have some mid to heavy engineering & construction experience/ qualifications, demonstrate hands on ability & thinking, as well as electrical & RF Engineering experience & understanding & demonstrate a good practical understanding of all aspects & be a committed / dedicated individual.
Except for the smallest of installations, this is very much a heavy condstruction process calling upon good engineer skills & reasoning on & off site for both the structural & RF aspects. Installations should be deemed to be of a high standard & for longevity and brought in at cost effective manor for clients, being able to choose good products, fit for use & in today's market, if you want to use this in your career, it can help you improve earnings.
TRAINING COURSES.
- SURVEY
- PRE SITE [remote] SURVEY*
- ON SITE SURVEY*
- MOST IDEAL LOCATION / LINE OF SIGHT/ INTERFERENCE/ SUBSTRATE INSPECTION
- RAMS / SAFETY ASSESSMENT BEFORE, DURING, CLEARING AWAY & LONG TERM
- CHOOSING THE FEED/ REFLECTOR
- PREDICTED EIRP / SIGNAL LEVELS
- ACTUAL KNOWN SIGNAL LEVELS / FOOTPRINT FROM KNOWN DATA
- CHOOSING MOUNTINGS
- WIND LOADING CONSIDERATION
- WIND SPEED X WIND PRESSURE LOCALISED CONSIDERATIONS
- COASTAL OR CHEMICAL / HARSH ENVIRONMENTS
- WALL MOUNTINGS [POLE MOUNTS/ A FRAMES / L BRACKETS ..ETC]
- FLAT ROOF MOUNTINGS & PROTECTION OF ROOF MATERIAL
- GROUND MOUNTINGS HARD SURFACE
- GROUND MOUNTINGS SOFT SOIL*
- *POURING CONCRETE OR SLABS/ RIBAR / SETTING TIMES
- MOTOR CHOICES
- SINGLE AXIS INSTALLATION
- H-H, POLARMOUNT or MOTORISED AZEL
- SINGLE AXIS OR TWIN AXIS
- INCLINED ORBIT TRACKING &/OR...
- SWITCHING FROM Ku C Ka / LINEAR / CIRCULAR [INCLINED]
- 36V 3A OR 5A / V BOX G BOX 19" RACK/ OTHER CONTROLLERS
- DISH SIZES [GENERAL CHOICES]
- 64CM 90CM 1M 1.1M 1.2M 1.3M 1.5M 1.8M 2M 2.4M
- 3M 3.2M 3.4M 3.6M 3.7M 3.8M 4M 5M 6M
- REFLECTOR MATERIAL
- INTELSAT/ EUTELSAT TYPE APPROVED
- DISH TYPE
- PRIME FOCUS
- OFFSET
- OFFSET [INVERTED]
- GREGORIAN
- CASSEGRAIN
- SHROUDED
- FEEDS
- LNBs LNBFs LNAs etc.
- OFFSET & PRIME FOCUS FEEDHORNS
- Ku BAND LNB/F
- Ku BAND C120 LNBs & C120 FEEDHORNS
- C BAND ON PRIME FOCUS or OFFSET DISH
- Ka BAND / Ka bands/
- DRO UNIVERSAL LNB DRO LOW TOL LNB PLL PLL REMOTE REFERENCE
- SHORT BAND SINGLE POLE DRO / PLL / PLL EXT REF.
- LINEAR / CIRCULAR / SUB BANDS
- POLARIZOR- MECHANICAL / MAGNETIC
- PRODELIN C120 ADAPTER FEEDHORN FITTINGS
- BUCs [transmitters]
- POWER/ SAFETY/ COOLING EQUIPMENT
- WAVEGUIDES
- LNA/ BUC ISOLATORS
- COAX / CONNECTORS
- WF100 WF125 WF165 WF233
- F X 2 BAR / 3 BAR COMPRESSION FITTINGS
- INSTALLATION PROCESS
- PREPERATION - EQUIPMENT
- WORKING AT HEIGHT SPECIAL CONSIDERATIONS
- SPECIAL PREPERATION FOR LIFTING IF REQUIRED
- PREPERATION - SAFETY- PUBLIC- SELF- PROPERTY [PROCESS]
- SAFE WORKING PRACTICES & SAFETY WORKWEAR
- INSTALLATION OF CLIMBING EQUIPMENT IF REQUIRED
- INSTALLATION OF PROPERTY PROTECTION IF REQUIRED
- INSTALLATION OF ROOF PROTECTOR [EG FOR NPRMs]
- INSTALLATION OF MOUNTINGS TO STRAIN / TORQUE LEVELS
- INSTALLATION OF MOTOR OR MOTOR PARTS
- INSTALLATION OF REFLECTOR OR REFLECTOR PARTS
- INSTALLATION OF FEED & FEED SUPPORT
- WIRING TO FEED [READY FOR ALIGNMENT]
- KEEP ALL SITE EQUPMENT SAFE FOR THE PUBLIC AT ALL TIMES REMINDER POINT
- ALIGNMENT PROCESSES
- CROSS CHECK ALL ASPECTS OF INSTALLATION BEFORE ALIGNMENT
- COMENCE ALIGNMENT PROCESSES FOR ACCURATE / SOLID ALIGNMENT
- RE- CHECK ALL POINTS OF INSTALLATION AFTER FINAL ALIGNMENT
- CABLING UP
- AVOIDING TRACING/ INDUCTION & NOISE AREAS
- & ALLOWING FOR MOTOR MOVEMENT AT REFLECTON+
- CLEARANCE FOR WIND
- TESTING AT THE STB
- FINAL STB SETTINGS FOR CLIENT
- .
- CLEANING UP
- SAFE REMOVAL OF ALL INSTALLATION EQUIPMENT
- CLEAR AN DEBRIS
- MAINTAIN SAFETY CONCIOUSNESS 'THROUGHOUT'
- CONTACT PURPLESAT /
- BCS SATELLITE ENGINEERING FOR THIS & OTHER COURSE DETAILS
- AND JOB APPLICATIONS FOR ANY VACANCIES.
- TEL: 07931 846757 International TEL: 00 44 1625 615379
